Фрагмент инструкции: руководство пользователя XEROX WORKCENTRE M128Подробные указания по применению содержатся в руководстве пользователя. Remove the Color Print Head labeled P105 from the plastic case and insert it into the right side of the print carriage. 4
2
3
Lower the print head latch until it clicks, to lock print heads into place. 4
4
Getting Started
LOADING
INK
CARTRIDGES
Loading the Black Cartridge Open the ink cartridge box. Unpack the black ink cartridge and peel off the foil seal. 1
Caution: Handle ink cartridges carefully to prevent contact with ink. Insert the green base of the ink cartridge, heel first, into the black print head numbered 1. 2
1
2
3
4
Push the ink cartridge down until it clicks into place. 3
1
2
3
4
Getting Started
5
LOADING
INK
CARTRIDGES
Loading the Color Cartridges
1
Unpack the magenta ink cartridge and peel off the foil seal. 2
2
Insert the green base of the magenta ink cartridge, heel first, into the color print head numbered 2. 3
4
Tip: The number on the print head corresponds to the ink cartridge number. 3
2 3
4
34
Push the ink cartridge down until it clicks into place. Repeat this process for the remaining yellow and cyan ink cartridges. Magenta Yellow Cyan
6
Getting Started
INSTALLING
YOUR
CONTROL
PANEL
Installing Your Control Panel Push the access cover down until completely closed. 1
1 2
1
3
4
34
Control Panel
Align the Control Panel within the provided recess and panel buttons. Push straight down firmly on both ends and the middle to snap the panel into place. 2
Getting Started
7
CONTROL
PANEL
FUNCTIONS
1 2
3 4 5
-
+
7 8 6
9
11
12 15 13 14
10
1. Paper Setup 2. Lighten/Darken 3. Display 4. Menu/Exit 5. Clear/ Stop 6. Color 7. Quality 8. Reduce/Enlarge
9. Scan Mode 10. Navigator 11. Error Light 12. Select 13. Copy Quantity 14. Start 15... |
Copyright © 2005 - 2012 - Diplodocs -
Все права защищены. Торговые марки принадлежат их соответствующим владельцам. |